Add Method

Description

Adds an occurrence of the referenced object.

Syntax

Visual Basic
Public Function Add( _ ByVal Profile As Object, _ ByVal Depth As Double, _ ByVal ProfileSide As DimpleFeatureConstants, _ ByVal DepthSide As DimpleFeatureConstants, _ Optional ByVal PunchRadius As Variant, _ Optional ByVal DieRadius As Variant, _ Optional ByVal TaperAngle As Variant, _ Optional ByVal MaterialSide As Variant, _ Optional ByVal ProfileCornerRadius As Variant, _ Optional ByVal DimensionType As Variant, _ Optional ByVal Round As Variant, _ Optional ByVal RoundCorners As Variant _ ) As Dimple

Visual Basic

Public Function Add( _
   ByVal Profile As Object, _
   ByVal Depth As Double, _
   ByVal ProfileSide As DimpleFeatureConstants, _
   ByVal DepthSide As DimpleFeatureConstants, _
   Optional ByVal PunchRadius As Variant, _
   Optional ByVal DieRadius As Variant, _
   Optional ByVal TaperAngle As Variant, _
   Optional ByVal MaterialSide As Variant, _
   Optional ByVal ProfileCornerRadius As Variant, _
   Optional ByVal DimensionType As Variant, _
   Optional ByVal Round As Variant, _
   Optional ByVal RoundCorners As Variant _
) As Dimple

Parameters

Profile

The profile to be used to construct the dimple.

Depth

Specifies the depth of the dimple.

ProfileSide

Value	Description
seDimpleDepthLeft
seDimpleDepthRight
seDimpleDimensionFull
seDimpleDimensionOffset
seDimpleMaterialInside
seDimpleMaterialOutside
seDimpleNoRoundCorners
seDimpleNoRoundEdges
seDimpleProfileLeft
seDimpleProfileRight
seDimpleRoundCorners
seDimpleRoundEdges

Member of the DimpleFeatureConstants constant set that specifies to which side of the profile the dimple is to be constructed.

DepthSide

Value	Description
seDimpleDepthLeft
seDimpleDepthRight
seDimpleDimensionFull
seDimpleDimensionOffset
seDimpleMaterialInside
seDimpleMaterialOutside
seDimpleNoRoundCorners
seDimpleNoRoundEdges
seDimpleProfileLeft
seDimpleProfileRight
seDimpleRoundCorners
seDimpleRoundEdges

Member of the DimpleFeatureConstants constant set that specifies to which side of the sheet metal surface the dimple is to be constructed.

PunchRadius

Specifies the punch radius of the dimple.

DieRadius

Specifies the die radius of the dimple.

TaperAngle

Specifies in radians the taper angle of the dimple.

MaterialSide

Member of the DimpleFeatureConstants constant set that specifies whether the dimple is to be constructed with the material inside or outside the profile.

ProfileCornerRadius

Specifies the radius of the corners.

DimensionType

Member of the DimpleFeatureConstants constant set that specifies the type of dimension (inside or outside) to be applied to the dimple.

Round

Member of the DimpleFeatureConstants that specifies whether or not the edges of the dimple are to be rounded.

RoundCorners

Member of the DimpleFeatureConstants that specifies whether or not the corners of the dimple are to be rounded.