| #define BOM_absocc_context_not_ancestor (EMH_BOM_error_base + 131) |
The absolute occurrence edit context line is not an ancestor of the BOMLine being edited.
Definition at line 424 of file bom_errors.h.
| #define BOM_absocc_context_not_topline (EMH_BOM_error_base + 126) |
Context must be set to top level BOM Line in order to assign an ID In Context.
Definition at line 409 of file bom_errors.h.
| #define BOM_absocc_edit_mode_off (EMH_BOM_error_base + 125) |
In Context edit mode is not active or BOMLine being edited is outside context range.
Definition at line 406 of file bom_errors.h.
| #define BOM_absocc_is_packed_occurrence (EMH_BOM_error_base + 137) |
You may not edit some attributes of a Packed BOM Line when In Context edit mode is turned on.
Definition at line 442 of file bom_errors.h.
| #define BOM_absocc_not_allowed_in_redline_mode (EMH_BOM_error_base + 163) |
The absolute occurrence context cannot be set while the display pending edits mode is enabled.
Definition at line 517 of file bom_errors.h.
| #define BOM_absocc_rel_not_allowed (EMH_BOM_error_base + 219) |
Creation of attachment data in absolute context mode is not allowed for substitute lines
Definition at line 688 of file bom_errors.h.
| #define BOM_access_denied_absocc_form (EMH_BOM_error_base + 146) |
Access denied on absocc form... attachment type = "%1$", dataset type = "%2$", form type = "%3$".
Definition at line 469 of file bom_errors.h.
| #define BOM_access_denied_bv_bvr_in_ir (EMH_BOM_error_base + 200) |
The BOM View or BOM View Revision object cannot be loaded. Check if you have proper access to it.
Definition at line 628 of file bom_errors.h.
| #define BOM_accountability_extension_not_attached (EMH_BOM_error_base + 197) |
No registered Extension to calculate the Net Effectivity could be found. Contact your System Administrator for assistance.
Definition at line 619 of file bom_errors.h.
| #define BOM_accountability_overlap_exists (EMH_BOM_error_base + 196) |
An overlap exists in source and target BOM Lines.
Definition at line 616 of file bom_errors.h.
| #define BOM_accountability_src_overlap_exists (EMH_BOM_error_base + 194) |
An overlap in effectivity exists in source BOM Lines.
Definition at line 610 of file bom_errors.h.
| #define BOM_accountability_target_overlap_exists (EMH_BOM_error_base + 195) |
An overlap in effectivity exists in target BOM Lines.
Definition at line 613 of file bom_errors.h.
| #define BOM_add_drawing_prevent_error (EMH_BOM_error_base + 178) |
The drawing item revision is prevented from being added as component in the product structure.
Definition at line 562 of file bom_errors.h.
| #define BOM_alignment_precision_mismatch (EMH_BOM_error_base + 218) |
Engineering Bill of Materials and Manufacturing Bill of Materials must both be either precise or imprecise for alignment synchronization.
Definition at line 685 of file bom_errors.h.
| #define BOM_AssmNotSetToUsePreferredPrt (EMH_BOM_error_base + 175) |
The item 2$ cannot be added to the assembly since it is not a preferred part to assembly programs 1$.
Definition at line 553 of file bom_errors.h.
| #define BOM_baseline_and_undo_failed (EMH_BOM_error_base + 203) |
The baseline operation has failed with the following error: "1$". During the "Undo" operation, the baseline has encountered the following error: "2$".
Definition at line 638 of file bom_errors.h.
| #define BOM_bl_refile_error (EMH_BOM_error_base + 84) |
NXmanager refile program has exited with errors.
Definition at line 283 of file bom_errors.h.
| #define BOM_bl_released_bvr (EMH_BOM_error_base + 79) |
Released BOM View Revision is found.
Definition at line 268 of file bom_errors.h.
| #define BOM_bl_restricted_item_type (EMH_BOM_error_base + 85) |
Baseline for Item Type '1$' cannot be created.
Definition at line 286 of file bom_errors.h.
| #define BOM_bl_rollback_error (EMH_BOM_error_base + 83) |
Baseline creation rolled back because of an error.
Definition at line 280 of file bom_errors.h.
| #define BOM_can_not_disconnect (EMH_BOM_error_base + 134) |
Cannot Disconnect.
Definition at line 433 of file bom_errors.h.
| #define BOM_can_not_edit_packed_occ_eff (EMH_BOM_error_base + 136) |
Cannot edit occurrence effectivity of a packed line.
Definition at line 439 of file bom_errors.h.
| #define BOM_can_not_remove_relation (EMH_BOM_error_base + 135) |
Cannot remove this Relation.
Definition at line 436 of file bom_errors.h.
| #define BOM_cannot_add_substitute_as_child_line (EMH_BOM_error_base + 221) |
The selection contains one or more substitute lines. Substitutes will not be pasted on the target Item.
Definition at line 694 of file bom_errors.h.
| #define BOM_cannot_change_linked_gc (EMH_BOM_error_base + 99) |
Structure changes are not possible for a generic component linked to by variant items.
Definition at line 328 of file bom_errors.h.
| #define BOM_cannot_show_unconfgd_variants_in_configtoload (EMH_BOM_error_base + 198) |
The BOM Window is in "Configured To Load" mode. In this mode "Show Unconfigured Variants" is not possible.
Definition at line 622 of file bom_errors.h.
| #define BOM_cant_add_sub_to_packed (EMH_BOM_error_base + 23) |
You cannot add Substitutes to a Packed BOM Line. Unpack and add/paste to a specific line.
Definition at line 96 of file bom_errors.h.
| #define BOM_cant_add_under_removed_line (EMH_BOM_error_base + 161) |
The line cannot be added under a line marked to be removed.
Definition at line 511 of file bom_errors.h.
| #define BOM_cant_assign_ckedout_de (EMH_BOM_error_base + 209) |
Checked-out Product Element objects cannot be assigned to a Manufacturing Bill Of Materials.
Definition at line 658 of file bom_errors.h.
| #define BOM_cant_assign_de_to_BOP (EMH_BOM_error_base + 206) |
Product Element objects cannot be assigned to a Bill Of Process.
Definition at line 649 of file bom_errors.h.
| #define BOM_cant_assign_de_to_imprecise_parent (EMH_BOM_error_base + 205) |
Product Element objects can only be assigned to a precise BOM View Revision.
Definition at line 646 of file bom_errors.h.
| #define BOM_cant_assign_de_without_itemRev (EMH_BOM_error_base + 207) |
Product Element objects without Item Revisions cannot be assigned to a Manufacturing Bill Of Materials.
Definition at line 652 of file bom_errors.h.
| #define BOM_cant_assign_de_without_thread (EMH_BOM_error_base + 210) |
Product Element objects without a Thread ID value cannot be assigned to a Manufacturing Bill Of Materials.
Definition at line 661 of file bom_errors.h.
| #define BOM_cant_change_view_on_root (EMH_BOM_error_base + 60) |
You may not use Change View on the top line of a BOM Window.
Definition at line 210 of file bom_errors.h.
| #define BOM_cant_cut_root (EMH_BOM_error_base + 8) |
You may not cut the top line of a BOM Window.
Definition at line 49 of file bom_errors.h.
| #define BOM_cant_delete_sequence (EMH_BOM_error_base + 199) |
The sequence cannot be removed as it is referenced by incremental changes.
Definition at line 625 of file bom_errors.h.
| #define BOM_cant_edit_attributes_of_removed_line (EMH_BOM_error_base + 162) |
The attributes cannot be edited because its line is marked to be removed.
Definition at line 514 of file bom_errors.h.
| #define BOM_cant_edit_no_psocc (EMH_BOM_error_base + 165) |
Cannot find PSOccurrence of this line to edit this attribute.
Definition at line 523 of file bom_errors.h.
| #define BOM_cant_edit_root_line_occ (EMH_BOM_error_base + 13) |
You may not edit occurrence attributes of the top line of a BOM Window.
Definition at line 64 of file bom_errors.h.
| #define BOM_cant_edit_substitute (EMH_BOM_error_base + 18) |
You cannot edit occurrence attributes of a Substitute line.
Definition at line 80 of file bom_errors.h.
| #define BOM_cant_expand_remote (EMH_BOM_error_base + 64) |
The BOM cannot be expanded because it contains a remote item.
Definition at line 222 of file bom_errors.h.
| #define BOM_cant_expand_unreadable (EMH_BOM_error_base + 62) |
The BOM cannot be expanded because it contains an unreadable item.
Definition at line 216 of file bom_errors.h.
| #define BOM_cant_list_subs_of_non_preferred (EMH_BOM_error_base + 72) |
You may not list the substitutes of a non-preferred component.
Definition at line 246 of file bom_errors.h.
| #define BOM_cant_pack_non_preferred_sub (EMH_BOM_error_base + 66) |
You cannot pack a non-preferred substitute. Try packing the preferred substitute.
Definition at line 228 of file bom_errors.h.
| #define BOM_cant_prefer_multiple (EMH_BOM_error_base + 21) |
You cannot prefer multiple substitutes of the same occurrence.
Definition at line 89 of file bom_errors.h.
| #define BOM_cant_prefer_when_packed (EMH_BOM_error_base + 75) |
You cannot prefer a Substitute on a Packed BOM Line. Unpack and perform the operation on a specific line.
Definition at line 256 of file bom_errors.h.
| #define BOM_cant_replace_mixed (EMH_BOM_error_base + 15) |
Precise and imprecise occurrences may not be simultaneously replaced.
Definition at line 71 of file bom_errors.h.
| #define BOM_cant_replace_root (EMH_BOM_error_base + 7) |
You may not replace the top line of a Window.
Definition at line 46 of file bom_errors.h.
| #define BOM_cant_replace_substitute (EMH_BOM_error_base + 22) |
You may not replace an occurrence with substitutes.
Definition at line 92 of file bom_errors.h.
| #define BOM_cant_replace_substructure (EMH_BOM_error_base + 155) |
Cannot replace the BOMLine since either the replacing node or the replaced node has substructure.
Definition at line 496 of file bom_errors.h.
| #define BOM_cant_set_unit_multi_type_effectivities (EMH_BOM_error_base + 211) |
BOM Lines do not support date and unit effectivity together.
Definition at line 664 of file bom_errors.h.
| #define BOM_cant_toggle_root (EMH_BOM_error_base + 14) |
Unable to set the top line of a BOM to be Precise/Imprecise it has no defined parent.
Definition at line 68 of file bom_errors.h.
| #define BOM_child_not_published (EMH_BOM_error_base + 65) |
The assembly contains unpublished components.
Definition at line 225 of file bom_errors.h.
| #define BOM_circular_structure (EMH_BOM_error_base + 6) |
You are attempting to create a circular structure.
Definition at line 43 of file bom_errors.h.
| #define BOM_compare_identical_data (EMH_BOM_error_base + 53) |
You cannot compare a BOM line with itself.
Definition at line 189 of file bom_errors.h.
| #define BOM_compare_invalid_data (EMH_BOM_error_base + 48) |
Invalid BOM lines for BOM compare.
Definition at line 173 of file bom_errors.h.
| #define BOM_compare_invalid_dest (EMH_BOM_error_base + 49) |
Invalid destination for BOM compare output.
Definition at line 176 of file bom_errors.h.
| #define BOM_compare_invalid_mode (EMH_BOM_error_base + 50) |
Invalid mode for BOM compare.
Definition at line 179 of file bom_errors.h.
| #define BOM_compare_multiple_revs (EMH_BOM_error_base + 51) |
Multiple revisions of 1$ detected under 2$.
Definition at line 182 of file bom_errors.h.
| #define BOM_compare_nested_roots (EMH_BOM_error_base + 52) |
Nested BOM Lines cannot be compared. If you really want to do this, open a second window.
Definition at line 186 of file bom_errors.h.
| #define BOM_compare_no_report (EMH_BOM_error_base + 59) |
No report exists for this BOM compare.
Definition at line 207 of file bom_errors.h.
| #define BOM_compare_not_allowed_in_redline_mode (EMH_BOM_error_base + 164) |
The comparison cannot be performed if either window has pending edits.
Definition at line 520 of file bom_errors.h.
| #define BOM_configure_in_item_is_not_vi (EMH_BOM_error_base + 100) |
Cannot configure in an item that is not a variant.
Definition at line 331 of file bom_errors.h.
| #define BOM_connect_failed (EMH_BOM_error_base + 107) |
Unable to connect '1$' to '2$'.
Definition at line 352 of file bom_errors.h.
| #define BOM_connline_is_topline (EMH_BOM_error_base + 111) |
Connection Line cannot be topLine.
Definition at line 364 of file bom_errors.h.
| #define BOM_create_connection_failed (EMH_BOM_error_base + 119) |
Failed to create Connection Line '1$'.
Definition at line 388 of file bom_errors.h.
| #define BOM_duplicate_bom_compare_mode (EMH_BOM_error_base + 76) |
BOMCompareMode '1$' already exists.
Definition at line 259 of file bom_errors.h.
| #define BOM_duplicate_variant_value (EMH_BOM_error_base + 28) |
Option has value 1$ already.
Definition at line 111 of file bom_errors.h.
| #define BOM_expr_not_condition (EMH_BOM_error_base + 73) |
The expression supplied should have been a condition, got non-logical op code 1$.
Definition at line 249 of file bom_errors.h.
| #define BOM_ic_change_unsaved_edits (EMH_BOM_error_base + 130) |
Cannot change Incremental Change Context with unsaved BOM edits.
Definition at line 421 of file bom_errors.h.
| #define BOM_ic_not_allowed_in_redline_mode (EMH_BOM_error_base + 166) |
Cannot set IC context while the display pending edits mode is enabled.
Definition at line 526 of file bom_errors.h.
| #define BOM_ices_in_other_context (EMH_BOM_error_base + 182) |
The line 1$ cannot be deleted because there are Incremental Changes in a context other than currently set in BOMWindow. Please refer to the Incremental Change information tab for more information.
Definition at line 574 of file bom_errors.h.
| #define BOM_ices_on_pred_reln (EMH_BOM_error_base + 140) |
The line cannot be deleted because it is referenced by incremental changes on its relation with predecessors.
Definition at line 451 of file bom_errors.h.
| #define BOM_ices_on_succ_reln (EMH_BOM_error_base + 141) |
The line cannot be deleted because it is referenced by incremental changes on its relation with successors.
Definition at line 454 of file bom_errors.h.
| #define BOM_input_is_nulltag (EMH_BOM_error_base + 113) |
NULLTAG(S) passed as inputs '1$'.
Definition at line 370 of file bom_errors.h.
| #define BOM_internal_error (EMH_BOM_error_base + 0) |
Internal error in BOM Module 1$
Definition at line 28 of file bom_errors.h.
| #define BOM_invaild_DE_for_assign (EMH_BOM_error_base + 208) |
Product Element objects of type "Promissory" cannot be assigned to a Manufacturing Bill Of Materials.
Definition at line 655 of file bom_errors.h.
| #define BOM_invalid_broken_link_input (EMH_BOM_error_base + 170) |
Input for 1$ ITK is invalid! Please review Customization -> Integration Toolkit (ITK) Function Reference documentation for help.
Definition at line 538 of file bom_errors.h.
| #define BOM_invalid_child_item_type (EMH_BOM_error_base + 147) |
The child cannot be added to the selected parent because the child type "%1$" is not valid for parent type "%2$".
Definition at line 472 of file bom_errors.h.
| #define BOM_invalid_class (EMH_BOM_error_base + 46) |
Invalid class tag handed to function.
Definition at line 166 of file bom_errors.h.
| #define BOM_invalid_comp_operator (EMH_BOM_error_base + 169) |
Invalid comparison operator.
Definition at line 535 of file bom_errors.h.
| #define BOM_invalid_custom_configured_ir (EMH_BOM_error_base + 204) |
The Item Revision "1$" does not belong to the underlying BOM Item "2$". Please contact your site administrator to review the customization done through BMIDE for the post action on the operation "fnd0getCustomConfiguredIrf".
Definition at line 643 of file bom_errors.h.
| #define BOM_invalid_data (EMH_BOM_error_base + 124) |
Invalid data: '1$'.
Definition at line 403 of file bom_errors.h.
| #define BOM_invalid_first_common_parent (EMH_BOM_error_base + 181) |
The first common parent of selected parts and manufacturing feature is invalid.
Definition at line 571 of file bom_errors.h.
| #define BOM_invalid_how_set (EMH_BOM_error_base + 93) |
An invalid value for how an option is set was passed in. Can only be UserSet, UserFixed or Variant Item.
Definition at line 310 of file bom_errors.h.
| #define BOM_invalid_input (EMH_BOM_error_base + 216) |
An invalid input for parent or child is being passed to the occurrence condition validation.
Definition at line 679 of file bom_errors.h.
| #define BOM_invalid_join_operator (EMH_BOM_error_base + 168) |
Invalid join operator for the clause.
Definition at line 532 of file bom_errors.h.
| #define BOM_invalid_parent_item_type (EMH_BOM_error_base + 180) |
The child cannot be added to the selected parent since the parent type 1$ is not valid for the child type 2$.
Definition at line 568 of file bom_errors.h.
| #define BOM_invalid_qty (EMH_BOM_error_base + 10) |
Invalid quantity value entered.
Definition at line 55 of file bom_errors.h.
| #define BOM_invalid_tag (EMH_BOM_error_base + 1) |
Invalid tag received by BOM Module.
Definition at line 31 of file bom_errors.h.
| #define BOM_invalid_target_line (EMH_BOM_error_base + 220) |
A child line cannot be added to a substitute line.
Definition at line 691 of file bom_errors.h.
| #define BOM_invalid_token (EMH_BOM_error_base + 45) |
Invalid token value handed to function.
Definition at line 163 of file bom_errors.h.
| #define BOM_invalid_variant_config_mode (EMH_BOM_error_base + 223) |
An invalid input was provided for the BOM Window Variant Configuration Mode. Valid values are 0 (single rule - single value), 1 (single rule - multiple values), 2 (Overlay).
Definition at line 702 of file bom_errors.h.
| #define BOM_invalid_variant_mode (EMH_BOM_error_base + 29) |
Invalid value given for option mode.
Definition at line 114 of file bom_errors.h.
| #define BOM_invalid_variant_option_mode (EMH_BOM_error_base + 222) |
Variant data created in the Product Configurator application is not supported in the current application. Please use variant data created in the Structure Manager application.
Definition at line 699 of file bom_errors.h.
| #define BOM_invalid_variant_value (EMH_BOM_error_base + 26) |
Index 1$ is outside the list of values defined for option 2$.
Definition at line 105 of file bom_errors.h.
| #define BOM_invalid_xform_value (EMH_BOM_error_base + 202) |
The transform matrix value is not valid.
Definition at line 634 of file bom_errors.h.
| #define BOM_is_packed_notes (EMH_BOM_error_base + 12) |
You may not edit the notes of a Packed BOM Line.
Definition at line 61 of file bom_errors.h.
| #define BOM_is_packed_occurrence (EMH_BOM_error_base + 11) |
You may not edit some attributes of a Packed BOM Line.
Definition at line 58 of file bom_errors.h.
| #define BOM_item_rev_read_only (EMH_BOM_error_base + 39) |
You will not be able to save any changes you make.
Definition at line 144 of file bom_errors.h.
| #define BOM_line_at_higher_level (EMH_BOM_error_base + 116) |
One or more BOMLine(s) is/are at higher level than connection Line '1$'.
Definition at line 379 of file bom_errors.h.
| #define BOM_line_comp_reuse_no_parent (EMH_BOM_error_base + 102) |
Cannot identify variant reuse in component BOM line without a parent BOM line.
Definition at line 337 of file bom_errors.h.
| #define BOM_line_failed_occ_condition (EMH_BOM_error_base + 214) |
The BOMLine failed the occurrence condition validation.
Definition at line 673 of file bom_errors.h.
| #define BOM_line_get_gde_failed (EMH_BOM_error_base + 112) |
Unable to get Interface for '1$'.
Definition at line 367 of file bom_errors.h.
| #define BOM_line_get_occ_failed (EMH_BOM_error_base + 108) |
Unable to get Occurrence for '1$'.
Definition at line 355 of file bom_errors.h.
| #define BOM_line_has_no_ir (EMH_BOM_error_base + 9) |
No revision configured for Item 1$.
Definition at line 52 of file bom_errors.h.
| #define BOM_line_not_substitute (EMH_BOM_error_base + 20) |
Line 1$ is not a substitute.
Definition at line 86 of file bom_errors.h.
| #define BOM_line_null_pathnode (EMH_BOM_error_base + 114) |
Unable to create pathnode for '1$'.
Definition at line 373 of file bom_errors.h.
| #define BOM_line_to_configure_is_not_gc (EMH_BOM_error_base + 101) |
Cannot configure a variant item into a structure line that is not a module.
Definition at line 334 of file bom_errors.h.
| #define BOM_line_type_is_not_supported (EMH_BOM_error_base + 115) |
The Type of BOMLine '1$' is not supported for this functionality.
Definition at line 376 of file bom_errors.h.
| #define BOM_lines_in_different_windows (EMH_BOM_error_base + 104) |
All given BOMLines do not belong to this BOMWindow.
Definition at line 343 of file bom_errors.h.
| #define BOM_markup_cannot_attach (EMH_BOM_error_base + 184) |
A BOM Markup object cannot be attached to the selected line.
Definition at line 580 of file bom_errors.h.
| #define BOM_markup_not_enabled (EMH_BOM_error_base + 183) |
BOM Markup features are not enabled.
Definition at line 577 of file bom_errors.h.
| #define BOM_markup_not_supported_prop (EMH_BOM_error_base + 187) |
This property cannot be used to create a markup.
Definition at line 589 of file bom_errors.h.
| #define BOM_markup_relation_not_exist (EMH_BOM_error_base + 185) |
The BOM Markup relation does not exist.
Definition at line 583 of file bom_errors.h.
| #define BOM_markup_removed (EMH_BOM_error_base + 188) |
The line has been marked for removal.
Definition at line 592 of file bom_errors.h.
| #define BOM_markup_removing (EMH_BOM_error_base + 189) |
The line has been marked for changes. Therefore a remove markup cannot be created.
Definition at line 595 of file bom_errors.h.
| #define BOM_markup_replace_replace (EMH_BOM_error_base + 191) |
The line has been marked for replacement.
Definition at line 601 of file bom_errors.h.
| #define BOM_markup_replace_substitute (EMH_BOM_error_base + 190) |
A line with substitutes cannot be replaced.
Definition at line 598 of file bom_errors.h.
| #define BOM_markup_substitute_substitute (EMH_BOM_error_base + 192) |
A duplicate substitute list change for the selected line cannot be created.
Definition at line 604 of file bom_errors.h.
| #define BOM_markup_wrong_obj (EMH_BOM_error_base + 186) |
The selected object cannot be used for markup.
Definition at line 586 of file bom_errors.h.
| #define BOM_multi_unit_conf_not_enabled (EMH_BOM_error_base + 193) |
The multi-unit configuration is not enabled. You may contact your System Administrator for help.
Definition at line 607 of file bom_errors.h.
| #define BOM_mvl_is_locked (EMH_BOM_error_base + 95) |
This itemrevision's variant data has been locked by another session.
Definition at line 316 of file bom_errors.h.
| #define BOM_no_absocc_for_context (EMH_BOM_error_base + 132) |
There is no absolute occurrence for the BOMLine being edited.
Definition at line 427 of file bom_errors.h.
| #define BOM_no_bomsos_target (EMH_BOM_error_base + 122) |
Unable to load modular option "%1$" from "%2$" without a BOMSos.
Definition at line 397 of file bom_errors.h.
| #define BOM_no_bvr_in_ir (EMH_BOM_error_base + 5) |
This Item Revision does not contain a BOMView Revision.
Definition at line 40 of file bom_errors.h.
| #define BOM_no_common_parent (EMH_BOM_error_base + 110) |
Unable to find Parent for '1$'.
Definition at line 361 of file bom_errors.h.
| #define BOM_no_condition_on_root_line (EMH_BOM_error_base + 94) |
No conditions are allowed on the top line.
Definition at line 313 of file bom_errors.h.
| #define BOM_no_configured_ir (EMH_BOM_error_base + 4) |
No revision of Item 1$ matches the current configuration rule.
Definition at line 37 of file bom_errors.h.
| #define BOM_no_current_compare (EMH_BOM_error_base + 78) |
Not an active compare.
Definition at line 265 of file bom_errors.h.
| #define BOM_no_item_rev (EMH_BOM_error_base + 138) |
The BOM Line does not contain any Item Revision.
Definition at line 445 of file bom_errors.h.
| #define BOM_no_notes_on_root (EMH_BOM_error_base + 17) |
You cannot access notes on the top line of the BOM.
Definition at line 77 of file bom_errors.h.
| #define BOM_no_substitutes_on_root (EMH_BOM_error_base + 19) |
You cannot have substitutes of the top line of the BOM.
Definition at line 83 of file bom_errors.h.
| #define BOM_no_such_bom_compare_mode (EMH_BOM_error_base + 77) |
BOMCompareMode '1$' does not exist.
Definition at line 262 of file bom_errors.h.
| #define BOM_no_variant_description (EMH_BOM_error_base + 40) |
No description for the option.
Definition at line 147 of file bom_errors.h.
| #define BOM_no_variant_name (EMH_BOM_error_base + 30) |
No name for the option.
Definition at line 117 of file bom_errors.h.
| #define BOM_no_variantrule_target (EMH_BOM_error_base + 123) |
Unable to load legacy option "%1$" from "%2$" without a BOMVariantRule.
Definition at line 400 of file bom_errors.h.
| #define BOM_no_variants_on_root (EMH_BOM_error_base + 24) |
You cannot have variants of the top line of the BOM.
Definition at line 99 of file bom_errors.h.
| #define BOM_noOwningProjectFound (EMH_BOM_error_base + 177) |
There is no owning project for the BOM View item.
Definition at line 559 of file bom_errors.h.
| #define BOM_not_added_option_condition (EMH_BOM_error_base + 43) |
Did you forget to Add the condition to check? (Add and then Remove it to suppress this message)
Definition at line 157 of file bom_errors.h.
| #define BOM_not_connection_line (EMH_BOM_error_base + 117) |
Input BOMLine is not a connectionLine '1$'.
Definition at line 382 of file bom_errors.h.
| #define BOM_not_find_absocc_compound_prop_attachment (EMH_BOM_error_base + 145) |
Unable to locate absocc form... attachment type = "%1$", dataset type = "%2$", form type = "%3$".
Definition at line 466 of file bom_errors.h.
| #define BOM_not_gde_line (EMH_BOM_error_base + 118) |
Input BOMLine(s) is not a GDELine(s) '1$'.
Definition at line 385 of file bom_errors.h.
| #define BOM_not_in_ic_context (EMH_BOM_error_base + 129) |
BOM Window is not in Incremental Change Context.
Definition at line 418 of file bom_errors.h.
| #define BOM_not_in_redline_mode (EMH_BOM_error_base + 160) |
The action can only be performed in the "Display Pending Edits" mode.
Definition at line 508 of file bom_errors.h.
| #define BOM_not_valid_pred (EMH_BOM_error_base + 139) |
The occurrence "%1$" is not a valid predecessor of the whatever_this_is "%2$".
Definition at line 448 of file bom_errors.h.
| #define BOM_not_yet_initialized (EMH_BOM_error_base + 2) |
Attempt to call the BOM Module before it has been initialized.
Definition at line 34 of file bom_errors.h.
| #define BOM_null_class_object (EMH_BOM_error_base + 105) |
Unable to create '1$'.
Definition at line 346 of file bom_errors.h.
| #define BOM_obsolete_variant_value (EMH_BOM_error_base + 27) |
Index references an obsolete value of option 1$.
Definition at line 108 of file bom_errors.h.
| #define BOM_occ_removed_from_other_session (EMH_BOM_error_base + 171) |
The occurrence about to be modified or deleted may have been removed by another session.
Definition at line 541 of file bom_errors.h.
| #define BOM_op_invalid_on_root (EMH_BOM_error_base + 133) |
This operation is not valid on the top line.
Definition at line 430 of file bom_errors.h.
| #define BOM_option_already_exists (EMH_BOM_error_base + 41) |
Item 1$ already contains option 2$.
Definition at line 150 of file bom_errors.h.
| #define BOM_option_condition_not_added (EMH_BOM_error_base + 38) |
Value field not empty -- did you forget to add the condition?
Definition at line 141 of file bom_errors.h.
| #define BOM_option_derived_from_itself (EMH_BOM_error_base + 58) |
Derived option is used in the condition -- may not derive an option from itself.
Definition at line 204 of file bom_errors.h.
| #define BOM_option_has_no_values (EMH_BOM_error_base + 44) |
Option has no values; you must add at least one before creating the option.
Definition at line 160 of file bom_errors.h.
| #define BOM_option_referenced (EMH_BOM_error_base + 42) |
You are trying to delete an option that is still in use.
Definition at line 153 of file bom_errors.h.
| #define BOM_option_value_not_added (EMH_BOM_error_base + 47) |
Did you forget to Add the last value? (Add and then Remove it to suppress this message)
Definition at line 170 of file bom_errors.h.
| #define BOM_option_value_referenced (EMH_BOM_error_base + 179) |
The value 1$ cannot be deleted since it is referenced by other objects.
Definition at line 565 of file bom_errors.h.
| #define BOM_options_bad_compare_enum (EMH_BOM_error_base + 56) |
In 3$ trying to compare against option 1$ set to '2$' which is a bad number.
Definition at line 198 of file bom_errors.h.
| #define BOM_options_bad_compare_string (EMH_BOM_error_base + 55) |
In 2$ trying to compare option against '1$' which is a bad number.
Definition at line 195 of file bom_errors.h.
| #define BOM_options_bad_compare_value (EMH_BOM_error_base + 57) |
Bad value '1$' to compare against -- must be numeric.
Definition at line 201 of file bom_errors.h.
| #define BOM_position_constrained (EMH_BOM_error_base + 143) |
The position of this occurrence is constrained and cannot be modified.
Definition at line 460 of file bom_errors.h.
| #define BOM_promote_failed (EMH_BOM_error_base + 106) |
Failed in create Relationship '1$'.
Definition at line 349 of file bom_errors.h.
| #define BOM_ref_designator_duplicate_value (EMH_BOM_error_base + 173) |
Duplicate value for reference designator.
Definition at line 547 of file bom_errors.h.
| #define BOM_ref_designator_format_error (EMH_BOM_error_base + 172) |
Value for reference designator is in wrong format.
Definition at line 544 of file bom_errors.h.
| #define BOM_ref_designator_quantity_error (EMH_BOM_error_base + 174) |
Quantity can only be blank or 1 if reference designator is assigned.
Definition at line 550 of file bom_errors.h.
| #define BOM_remote_item (EMH_BOM_error_base + 63) |
The item is remote.
Definition at line 219 of file bom_errors.h.
| #define BOM_restruct_not_allowed_for_lines_with_subgroups (EMH_BOM_error_base + 213) |
Substitute Group error for restructure operations
Definition at line 670 of file bom_errors.h.
| #define BOM_restructure_duplicate_ic_remove_attempted (EMH_BOM_error_base + 150) |
Line 1$ is already removed by Incremental Change 2$.
Definition at line 481 of file bom_errors.h.
| #define BOM_restructure_ic_context_required (EMH_BOM_error_base + 149) |
Line 1$ is affected by Incremental Changes (IC). Cannot restructure without setting an active IC context.
Definition at line 478 of file bom_errors.h.
| #define BOM_restructure_ices_of_other_contexts (EMH_BOM_error_base + 151) |
Cannot restructure Line 1$ with Incremental Change 2$ as it is affected by other Incremental Changes.
Definition at line 484 of file bom_errors.h.
| #define BOM_restructure_invalid_tag (EMH_BOM_error_base + 158) |
The structure is stale. Please refresh it.
Definition at line 505 of file bom_errors.h.
| #define BOM_restructure_lost_absocc (EMH_BOM_error_base + 157) |
The move to action dropped some absolute occurrences. Line 1$ has one or more appearance path nodes that are not in the current context.
Definition at line 502 of file bom_errors.h.
| #define BOM_restructure_move_to_invalid_branch (EMH_BOM_error_base + 154) |
The lines "%1$" and "%2$" are not in the same structure.
Definition at line 493 of file bom_errors.h.
| #define BOM_restructure_move_to_multi_line (EMH_BOM_error_base + 156) |
The move to action cannot handle the absolute occurrence data. Line 1$ has multiple appearance path nodes, and occurrence thread of 2$ has multiple lines.
Definition at line 499 of file bom_errors.h.
| #define BOM_restructure_not_allowed_with_absocc (EMH_BOM_error_base + 167) |
This restructure action is not allowed with lines that are using absolute occurrences.
Definition at line 529 of file bom_errors.h.
| #define BOM_restructure_removing_context_line (EMH_BOM_error_base + 153) |
The line "%1$" is a context line for an absolute occurrence. Removing it will lose the absolute occurrence data.
Definition at line 490 of file bom_errors.h.
| #define BOM_restructure_with_pending_edit (EMH_BOM_error_base + 152) |
The line "%1$" cannot be restructured because it contains pending edits.
Definition at line 487 of file bom_errors.h.
| #define BOM_revokingProgIsPrtOfAssmProgList (EMH_BOM_error_base + 176) |
The item is used as a preferred part in the assembly, and the relation cannot be removed.
Definition at line 556 of file bom_errors.h.
| #define BOM_root_not_in_this_window (EMH_BOM_error_base + 128) |
The root line is not visible in this window.
Definition at line 415 of file bom_errors.h.
| #define BOM_select_one_line (EMH_BOM_error_base + 16) |
Select one line of the BOM only.
Definition at line 74 of file bom_errors.h.
| #define BOM_serious_error (EMH_BOM_error_base + 148) |
The BOM module has encountered a serious internal error 1$. Please restart your session or data integrity may be affected.
Definition at line 475 of file bom_errors.h.
| #define BOM_set_failure_absocc_compound_prop_value (EMH_BOM_error_base + 144) |
Not able to set absocc compound property value.
Definition at line 463 of file bom_errors.h.
| #define BOM_subgroup_prefs_incorrect (EMH_BOM_error_base + 212) |
Error to indicate that the value given for a Substitute Groups preference is incorrect
Definition at line 667 of file bom_errors.h.
| #define BOM_subst_failed_occ_condition (EMH_BOM_error_base + 215) |
The substitute of the BOMLine failed the occurrence condition validation.
Definition at line 676 of file bom_errors.h.
| #define BOM_suppression_constrained (EMH_BOM_error_base + 142) |
The suppression state of this occurrence is constrained and cannot be modified.
Definition at line 457 of file bom_errors.h.
| #define BOM_unreadable_item (EMH_BOM_error_base + 61) |
The item is unreadable.
Definition at line 213 of file bom_errors.h.
| #define BOM_value_not_in_variant (EMH_BOM_error_base + 33) |
Value '1$' not in option '2$'.
Definition at line 126 of file bom_errors.h.
| #define BOM_variant_cant_find (EMH_BOM_error_base + 37) |
Cannot find option 1$.
Definition at line 138 of file bom_errors.h.
| #define BOM_variant_cond_rollup_calculate_error (EMH_BOM_error_base + 217) |
An error has occurred while calculating the Rollup Variant Condition for the BOM Line "1$".
Definition at line 682 of file bom_errors.h.
| #define BOM_variant_derived_error_item (EMH_BOM_error_base + 71) |
Conflicting derived defaults on 1$ and 2$.
Definition at line 243 of file bom_errors.h.
| #define BOM_variant_error_condition (EMH_BOM_error_base + 34) |
BOM variant error condition: 1$.
Definition at line 129 of file bom_errors.h.
| #define BOM_variant_error_item (EMH_BOM_error_base + 35) |
BOM variant error item: in evaluating an error check on 1$.
Definition at line 132 of file bom_errors.h.
| #define BOM_variant_invalid_bom_vrule (EMH_BOM_error_base + 70) |
Invalid BOM variant rule.
Definition at line 240 of file bom_errors.h.
| #define BOM_variant_invalid_cond_clause (EMH_BOM_error_base + 67) |
Invalid variant condition clause.
Definition at line 231 of file bom_errors.h.
| #define BOM_variant_invalid_operation (EMH_BOM_error_base + 68) |
Invalid variant clause operation.
Definition at line 234 of file bom_errors.h.
| #define BOM_variant_invalid_range (EMH_BOM_error_base + 69) |
Invalid variant clause range selected.
Definition at line 237 of file bom_errors.h.
| #define BOM_variant_many_revs (EMH_BOM_error_base + 54) |
May not rename an option with more than one revision.
Definition at line 192 of file bom_errors.h.
| #define BOM_variant_multiple_values_unsupported (EMH_BOM_error_base + 224) |
The BOM Window Variant configuration mode 0 (single rule - single value) does not support multiple BOM Variant values. Please change the BOM Window Variant configuration mode to 1 (single rule - multi value).
Definition at line 705 of file bom_errors.h.
| #define BOM_variant_no_configured (EMH_BOM_error_base + 31) |
No configured revision of item 1$ containing option 2$.
Definition at line 120 of file bom_errors.h.
| #define BOM_variant_not_unique (EMH_BOM_error_base + 32) |
There is more than one Item that matches '1$' and has an option '2$'.
Definition at line 123 of file bom_errors.h.
| #define BOM_variant_operation_unsupported (EMH_BOM_error_base + 225) |
The selected operation does not support usage of the BOM Window Variant configuration mode 2 (Overlay). Please change the BOM Window Variant configuration mode to 0 (single rule - single value) or 1 (single rule - multi value).
Definition at line 708 of file bom_errors.h.
| #define BOM_variant_wrong_mode (EMH_BOM_error_base + 25) |
Asking for the value of an option when it has been set to a different mode.
Definition at line 102 of file bom_errors.h.
| #define BOM_variants_derived_conflict (EMH_BOM_error_base + 36) |
Derived option 1$ was set to 2$, but we are now trying to change it to 3$.
Definition at line 135 of file bom_errors.h.
| #define BOM_veb_needs_refresh (EMH_BOM_error_base + 74) |
Variant data for this item revision has been edited in another session. Refresh required.
Definition at line 252 of file bom_errors.h.
| #define BOM_vi_cannot_replace_in_bad_config (EMH_BOM_error_base + 98) |
Cannot replace variant item with conflicting values into a variant item structure.
Definition at line 325 of file bom_errors.h.
| #define BOM_vi_cannot_replace_in_non_vi (EMH_BOM_error_base + 97) |
Cannot replace anything other than a variant item into a variant item structure.
Definition at line 322 of file bom_errors.h.
| #define BOM_vi_cannot_replace_non_generic (EMH_BOM_error_base + 96) |
Cannot replace non-generic component in a linked variant item.
Definition at line 319 of file bom_errors.h.
| #define BOM_vi_reuse_id_not_possible (EMH_BOM_error_base + 121) |
Using parent requirements to identify VI reuse in this BOM line is not possible.
Definition at line 394 of file bom_errors.h.
| #define BOM_window_invalid_variant_action_mode (EMH_BOM_error_base + 227) |
An invalid variant action mode "%1$" is provided for the current BOM Window configuration mode "%2$". The configuration modes 0 (single rule - single value) and 1 (single rule - multi value) support the action modes 0, 3 and 4. The configuration mode 2 (Overlay) supports the action modes 0, 1, 2 and 3.
Definition at line 714 of file bom_errors.h.
| #define BOM_window_multiple_variant_rules_unsupported (EMH_BOM_error_base + 226) |
The BOM Window Variant configuration modes 0 (single rule - single value) and 1 (single rule - multiple values) do not support multiple BOM Variant values. Please change the BOM Window Variant configuration mode to 2 (Overlay).
Definition at line 711 of file bom_errors.h.
| #define BOM_window_topline_null (EMH_BOM_error_base + 127) |
Window does not have any topline loaded.
Definition at line 412 of file bom_errors.h.
| #define BOM_writer_attempted_read_before_traversal (EMH_BOM_error_base + 103) |
BOMWriter: Attempt to read unselected AncestorLines before traversal occurred.
Definition at line 340 of file bom_errors.h.
| #define BOM_writer_builder_class_not_found (EMH_BOM_error_base + 88) |
BOM_writer: builder class '1$' was not found.
Definition at line 295 of file bom_errors.h.
| #define BOM_writer_format_requires_output (EMH_BOM_error_base + 87) |
BOM_writer: format was given NULL output mechanism.
Definition at line 292 of file bom_errors.h.
| #define BOM_writer_matrix_missing_or_null (EMH_BOM_error_base + 82) |
BOM_writer (legacy) matrix is missing or null.
Definition at line 277 of file bom_errors.h.
| #define BOM_writer_parameter_is_null (EMH_BOM_error_base + 80) |
BOM_writer parameter '1$' is null.
Definition at line 271 of file bom_errors.h.
| #define BOM_writer_parameter_is_wrong_type (EMH_BOM_error_base + 81) |
BOM_writer parameter '1$' is wrong type.
Definition at line 274 of file bom_errors.h.
| #define BOM_writer_plmxml_invalid_input_structure (EMH_BOM_error_base + 201) |
The BOM writer PLMXML format is used with an invalid input structure.
Definition at line 631 of file bom_errors.h.
| #define BOM_writer_plmxml_save_error (EMH_BOM_error_base + 86) |
BOM_writer: plmxml returned '1$' on save.
Definition at line 289 of file bom_errors.h.
| #define BOM_writer_preference_depth_exceeded (EMH_BOM_error_base + 120) |
BOMWriter: User Attributes preference depth exceeded.
Definition at line 391 of file bom_errors.h.
| #define BOM_writer_user_attribute_target_list_error (EMH_BOM_error_base + 89) |
BOM_writer: error in user attribute list for '1$' position 2$: expected '3$', found '4$'.
Definition at line 298 of file bom_errors.h.
| #define BOM_writer_user_attribute_target_specifier_error (EMH_BOM_error_base + 91) |
BOM_writer: in target specifier for '1$', malformed or misplaced item '2$'.
Definition at line 304 of file bom_errors.h.
| #define BOM_writer_user_attribute_target_unrecognised (EMH_BOM_error_base + 90) |
BOM_writer: unknown or badly formed user attribute target '1$'.
Definition at line 301 of file bom_errors.h.
| #define BOM_writer_user_attributes_duplicate_key (EMH_BOM_error_base + 92) |
BOMWriter: in target '1$', user attribute key '2$' was given properties '3$' and '4$'.
Definition at line 307 of file bom_errors.h.
| #define BOM_zero_size_taglist (EMH_BOM_error_base + 109) |
Must specify atleast 1 BOMLine for '1$'.
Definition at line 358 of file bom_errors.h.